There are a few factors to consider when purchasing a hole saw to cut stainless steel. The thickness of the steel, the type of steel, and the application all play a role in determining the best saw for the job. With so many different brands and types of saws on the market, it can be difficult to decide which one is right for you. Best Tool Center‘s list of the best hole saws for stainless steel will help you narrow down your choices and find the perfect saw for your next project.
1. Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw
- 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life.
- 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
- 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling.
- 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone.
- 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm depth, and 5mm for the stainless steel.
– The Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw is a very strong drill bit and is made of high-quality materials.
– It is a good buy and comes in a nice package.
– It can be used to drill through different types of metal.
– The drill bits are very easy to use and are very sharp.
Cons:
– The drill bits are not very durable and they can break easily if they are not used properly.
2. EZARC Carbide Hole Saw
- Carbide Hole Cutter precisely cuts material up to 3/16 in. thick.
- Cuts stainless steel, mild steel, iron, copper and brass sheet.
- Spring loaded pilot bit for fast drilling and clean plug ejection.
- Carbide teeth cut over 500 holes through stainless steel. Up to 10x longer cutting life vs standard bi-metal hole saws.
- All in one design: pilot drill bit, spring, wrench are included, no need to buy any extra accessories for the cutting.
– They are durable so they will last far longer than most other brands.
– These hole saws are far more affordable than most other brands.
– They are very easy to use and require very little maintenance.
Cons:
– They do not cut as clean as some of the more expensive brands.
– They can be difficult to find in stores.
3. Klein Tools 31868 Heavy Duty Hole Cutter
f you’re in the market for a heavy-duty hole cutter, Klein Tools’ 31868 model should be at the top of your list. This tool is designed for tough applications, and can easily cut through materials like steel, copper, and aluminum. The 31868 is also very versatile. It can be used in both handheld and drill-mounted applications, making it perfect for a variety of projects. Plus, Klein Tools is known for its high-quality construction, so you can be sure this hole cutter will last for years to come.
- Heavy duty, durable carbide hole cutters for long life
- Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick
- Split point pilot drill bit prevents bit walking
- Integrated flange prevents the operator from drilling beyond the sheet metal
- Conduit and pipe sizes: 1-1/2-Inch (3.8 cm)
Pros:
– The Klein Tools 31868 Heavy Duty Hole Cutter is designed to be used on metal, plastic, and wood.
– The tool is easy to use and can cut through material up to 1-7/8” thick.
– The cutter comes with a warranty.
Cons
– Some users have reported that the tool is difficult to use on thicker material.
– The cutter may not be able to cut through all types of metal.
4. ASNOMY 8PCS Large TCT Hole Saw
Looking for a quality hole saw that can handle a variety of materials? Check out the ASNOMY 8PCS Large TCT Hole Saw. This saw can cut through wood, metal, and plastic with ease, making it the perfect tool for any DIY project. The ASNOMY 8PCS Large TCT Hole Saw is made from high-quality materials, ensuring a long lifespan and consistent performance. It also comes with a carrying case, making it easy to transport and store.
- Top Quality：Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；
- Large Size：Include 5/8Inch(16mm), 7/8Inch(22mm),1-3/16Inch(30mm),1-9/16Inch(40mm), 2Inch(50mm), 2-3/8Inch(60mm)，and 2pcs Extra Titanium-Plated Pilot Drill bit ,each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust).
- Unique Three-blade Design: This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals;
- Multipurpose Tools：This Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone.
- High precision and Easy to Use: TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine
Pros:
– The large size of the hole saws allows for quick and easy drilling of large holes.
– The saws are made of high-quality materials, which makes them durable and long-lasting.
– The saws come with a storage case, which is convenient for keeping them organized and protected.
Cons:
– These saws are quite expensive.
– The saws are not suitable for drilling very small holes.
5. Rannb 38mm/1.5 Inch Carbide Tipped Hole Saw
- ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance.
- ⭐【Dimension】Cutting Dia: 38mm/ 1.5";Shank Dia: 10mm/0.4" ;Hole Saw Depth : 25mm/ 1"
- ⭐【Ideal Design】Split tip pilot drill prevents damage by gradually guiding cutter to material.
- ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit
- ⭐【Applicable Material】You can easily to drill on the stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
– The saw is made from solid carbide for added durability.
– It has a wide range of applications.
– The saw is easy to use.
– This product is affordable.
Cons:
– The saw is not suitable for all materials.
FAQs
1. What is the best hole saw for stainless steel?
The best hole saw for stainless steel would be one with a high-speed steel cutting edge and a tungsten carbide tip. The cutting edge should be sharp and the tungsten carbide tip should be resistant to wear.
2. What are the different types of hole saws for stainless steel?
There are different types of hole saws for stainless steel depending on the application. Some hole saws are designed for cutting through thick materials, while others are designed for cutting through thin materials. There are also hole saws designed for specific applications, such as cutting through stainless steel pipes.
3. What are the benefits of using a hole saw for stainless steel?
There are many benefits of using a hole saw for stainless steel. Hole saws can cut through thick materials quickly and easily, and they can also be used for specific applications such as cutting through stainless steel pipes. Hole saws are also relatively inexpensive, which makes them a great option for those on a budget.
4. What are the different sizes of hole saws for stainless steel?
There are many different sizes of hole saws for stainless steel. The most common sizes are 1/2 inch, 3/4 inch, and 1 inch.
5. What are the different brands of hole saws for stainless steel?
There are several different brands of hole saws for stainless steel. Some of the most popular include Milwaukee, Dewalt, and Makita.
